• Custom printed parking pass hang tag, 3-1/2 x 9 inch, die-cut mirror hook, with a your logo here and your text here sample design on a white background
  • Two custom printed school parking pass hang tags, 3-1/2 x 9 inch, on a school office counter: a high school student parking permit and an elementary car rider tag
  • Two custom printed parking pass hang tags, 3-1/2 x 9 inch, on a desk, showing the die-cut mirror hook with a lake community design and a Specialist ID design
  • Custom printed 3-1/2 x 9 inch high school student parking permit with a hawk mascot and permit number, hanging behind a rear-view mirror in a school parking lot
  • Custom printed 3-1/2 x 9 inch elementary school car rider tag with a large family number, hanging behind a rear-view mirror at a school pickup lane
  • Custom printed 3-1/2 x 9 inch parking pass with a lake community design and unit number, hanging behind a car rear-view mirror
  • Custom printed 3-1/2 x 9 inch parking pass with the Specialist ID logo and a staff permit number, hanging behind a car rear-view mirror
1 7
IN STOCK

Custom Printed Parking Pass Hang Tags, Laminated, 3-1/2 x 9

Custom Printed Parking Pass Hang Tags, Laminated, 3-1/2 x 9

$4.89ea

Part number: CustomParkingTag-35X90-TS

Total Price: $0.00
Get a Quote
View full details
Design It — Front and Back
1
Click to upload or drag & drop
PNG, JPG or WEBP · 20MB max · 300 dpi at 3-1/2″ × 9″ prints sharpest
2
Click to upload or drag & drop
PNG, JPG or WEBP · 20MB max
3
Position & size drag the preview · scroll to zoom
Zoom 100%
Prefer to send your artwork later?
Human artwork review on every orderA real person checks resolution, bleed and the hook cutout before anything prints
Printed and laminated in-houseFrom your file to the finished pass
Free shipping over $99Ships free from Miami, Florida

Customers like you also choose...

A Vertical Parking Pass Hang Tag Holder, Clear Rigid Vinyl with a rectangular shape, featuring a circular cutout for the handle, and designed to double as a clear vinyl hang tag. Clear, rigid vertical Vertical Parking Pass Hang Tag Holder (1840-3600) displaying a Specialist ID logo, resting on a vehicle gear shifter.

Vertical Parking Pass Holder

Vertical Parking Pass Holder

#1840-3600
$0.62
$0.91 $0.62
Clear Rigid Vinyl Horizontal Hang Tag Holder 1840-3650 - empty holder on white background Rearview mirror with a Specialist ID badge and a Horizontal Parking Pass Hang Tag Holder, Clear Rigid Vinyl attached, seen inside a car.

Horizontal Parking Pass Holder

Horizontal Parking Pass Holder

#1840-3650
$0.62
$0.91 $0.62
A Specialist ID Handicap Hang Tag Holder (SPID-1120) with a blue and white disabled persons parking identification permit tag from Florida's Department of Highway Safety and Motor Vehicles, designed to fit in a clear vinyl handicap holder, with an expiration date sticker from October 2018. Hand holding a Specialist ID Handicap Hang Tag Holder (SPID-1120) with an expiration date of October 2018, hanging from the rearview mirror as a convenient rearview mirror accessory inside a vehicle.

Handicap Hang Tag Holder

Handicap Hang Tag Holder

#SPID-1120
$1.99
$1.99
Custom printed parking pass hang tag, 3-1/2 x 5-3/8 inch, die-cut mirror hook, with a your logo here and your text here sample design on a white background Two custom printed school parking pass hang tags, 3-1/2 x 5-3/8 inch, on a school office counter: a high school student parking permit and an elementary car rider tag

Custom Parking Pass Hang Tags, 3-1/2 x 5-3/8

Custom Parking Pass Hang Tags, 3-1/2 x 5-3/8

#CustomParkingTag-35X54-TS
$3.89
$3.89
1840-3600 badge holder with a small shield and horizontal Your Logo Here branding along the bottom. Blue handicapped parking permit sign with a red prohibition symbol over it and the text "Does Not Fit" at the top, emphasizing the need for **Custom Clear Rigid Vinyl Vertical Vehicle Parking Pass Hang Tag Holder - Add Your Logo** to ensure vehicle hang tag holders promote brand awareness effectively.

Custom Parking Pass Holder

Custom Parking Pass Holder

#1840-3600-Custom
$2.29
$2.29
Overview

A parking pass that hangs on the mirror, front and back

Custom Printed Parking Pass Hang Tags (CustomParkingTag-35X90-TS) are 3-1/2 x 9 inch passes with a die-cut hook that slips over a rear-view mirror. Your artwork prints in full color on both sides, edge to edge.

Upload your front and back designs in the designer above and see the finished shape before you order. Print the same artwork on both sides, leave the back blank white for a handwritten plate or unit number, or give the back its own layout for lot rules. A real person checks every file before it prints, and digital proofs are available on request.

Each pass is printed on 10 mil Teslin synthetic paper, then laminated with 10 mil clear film on both sides and die-cut with rounded corners. The result is a waterproof, tear-resistant pass about 30 mil thick.

Safety note: Take the pass down before you drive. A pass hanging from the mirror can block your view of the road, and many states prohibit driving with a placard or anything else hanging from the rearview mirror. Hang it only while you are parked, and check your state's rules.

For a numbered run or a larger project, request a quote or speak with a specialist.

Your brand, up close

Student parking permits and car rider tags

Put your school name, mascot and colors on the pass. For numbered permits or family numbers, contact us before ordering.

High school student parking permit, example design
High school student parking permit, example design
Elementary car rider tag, example design
Elementary car rider tag, example design
Two sides, one pass

Design both sides in one place

Flip between the front and the back in the designer. Print the same artwork on both, leave the back blank, or give it a design of its own, such as lot rules or a contact number.

Front

Your full-color artwork, edge to edge

  • ✓Full bleed. Color runs right off the edge; we print past the trim so no white sliver shows.
  • ✓Safe zone. Keep names, logos and dates inside the dotted line in the designer.
  • ✓The hook stays clear. The hook cutout is die-cut after printing, so keep names, numbers and logos out of it.
Back

Same as the front, blank, or its own design

  • ✓Same as front keeps the pass readable from inside the car and through the windshield.
  • ✓Blank white leaves room to write a plate or unit number by hand.
  • ✓Different artwork for lot rules, a map or a contact number.
How it's made

From your file to a finished pass

Printed, laminated and cut in-house, with a real person checking the artwork along the way.

Step 1

Artwork check

A real person looks at every file: resolution, bleed past the edge, and nothing important sitting in the hook cutout. If it is ready, it prints. If not, we clean it up or send you a proof.

Step 2

Full-color print, both sides

Your front and back print edge to edge on 10 mil Teslin synthetic paper, a tear-resistant sheet.

Step 3

Laminate, top and bottom

A 10 mil clear film is bonded to each side under heat and pressure, sealing the print against water, sweat and scuffs.

Step 4

Die-cut with the hook

Each pass is die-cut to shape through all three layers, with rounded corners and a hook that slips over a rear-view mirror.

Step 5

Checked and shipped

Finished passes are inspected, counted and packed flat so they are ready to hand out.

The build

Built like an ID badge, not a paper pass

Three bonded layers make a pass that stays flat and rigid when it is hung, moved between cars and handled every day.

  1. 1
    Clear laminate, top
    10 mil
    Seals the print against water, sweat and scuffs.
  2. 2
    Printed synthetic core
    10 mil Teslin, full color both sides
    Tear-resistant synthetic paper that holds sharp text and rich color.
  3. 3
    Clear laminate, bottom
    10 mil
    Matching film underneath keeps the pass flat and rigid.
Custom printed laminated parking pass hang tag
Our team

Your artwork gets a careful eye

You know your lot. We make sure the pass does it justice, checking resolution, bleed and the hook cutout before printing. Have a question about your file? Our team can help.

  • A real person checks every order. Resolution, bleed and the hook cutout are looked at before anything prints. If something needs attention, we contact you.
  • Digital proofs on request. Ask if you would like to approve a proof before we print.
  • Have a deadline or a larger project? Talk to our team before ordering.
The detail

Product specifications

Part number
CustomParkingTag-35X90-TS
Finished size
3-1/2 x 9 inches, rounded corners
Material
10 mil Teslin synthetic core laminated with 10 mil clear film on each side (about 30 mil finished). Waterproof and tear resistant.
Printing
Full color, both sides, edge to edge (full bleed)
Attachment
Die-cut hook that hangs over a rear-view mirror
Artwork
Preview PNG, JPG or WEBP online; keep text and logos inside the dotted safe line. Send PDF, SVG, AI or EPS after checkout.
Quantity and timing
See the ordering section above for the current minimum, volume pricing and lead time.
Common questions

Before you order

Can I order without using the designer?
Yes. Choose Skip the designer, add the passes to your cart, and reply to your order confirmation with your artwork. Our art team sets the layout and sends a proof before anything prints.
How do I place my artwork in the designer?
Drag your artwork in the preview to move it, and scroll or pinch to zoom. The preview is shown to scale.
What do the dotted line and the hook in the preview mean?
The dotted line is the safe zone. Keep names, numbers, logos and dates inside it; anything outside it can be cut off. Fill the whole pass with your background color or photo so no white shows at the edge. The preview shows the finished shape, so what you see in the hook cutout is cut away.
What can go on the back?
Anything you like. Print the same artwork as the front, leave it blank white so you can write on it, or upload a separate design for the back: lot rules, a map or a contact number.
What file should I send?
For the online preview, use a PNG, JPG or WEBP up to 20 MB. A file sized to the pass at 300 dpi prints sharpest. If you have a print-ready PDF or a vector file (SVG, AI, EPS), send it after checkout.
Can each pass have its own number or unit?
Contact us before ordering with your quantity and a sample of your list, and we will tell you what we can do for numbered runs.
Can I write on the pass?
A permanent marker writes on the laminate, so a blank white back works well for a plate number or unit filled in by hand.
Can I leave the pass hanging while I drive?
No. Take the pass down before you drive. A pass hanging from the mirror can block your view of the road, and many states prohibit driving with a placard or anything else hanging from the rearview mirror. Hang it only while you are parked, and check your state's rules.
How durable is it?
The printed Teslin core is sealed between two layers of 10 mil laminate, so the pass is waterproof, tear resistant and stays flat.
Do I get a digital proof?
A real person reviews every order. If your artwork and layout are clear, we print the design you submitted. If something needs attention, we contact you. Digital proofs are available on request.
Are quantity discounts available?
Yes. Volume pricing applies automatically in your cart, and the pricing tiers are shown in the ordering section above. For a larger project or a mix of products, request a quote.
How soon can these be produced?
The current lead time is shown in the ordering section. If you have a firm date, contact us before ordering with your quantity and deadline.
Ready when you are

Ready to make it yours?

Upload your artwork above and see the pass before you order, or send your files after checkout for help with the layout.

Add your artwork Request a Quote

Need a hand? Call 1-800-380-6726.

Reviews