• The Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760) is a clear, heavy-duty, FIPS-201 approved protector with 13.56 MHz RFID shielding, green and white label, side card insertion, and made in Taiwan.
  • A person holds the Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760), a heavy-duty protector for CAC, TWIC, PIV, HSPD-12, and secure IDs, featuring 13.56 MHz RFID-blocking and two visible white cards inside.
  • The Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760) is a heavy duty horizontal smart card protector with green accent, fits CAC/TWIC/PIV badges, shields 13.56 MHz RFID, and works with reels, lanyards, or clips.
  • A hand partially slides a card from the Specialist ID Dual Sided RFID Blocking Badge Holder Horizontal (SPID-1760) to scan it; cards remain unscannable when fully inside, ensuring secure storage for CAC, TWIC, PIV, HSPD-12 & Secure ID badges.
  • Image shows which cards work with the Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760): flat IDs and smart cards are compatible, especially in dual-sided holders; thick clamshell cards are not.
  • A hand holds the Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760), a heavy-duty, transparent case for CAC, TWIC, PIV, HSPD-12 & Secure ID badges. It contains a white smart card with a gold chip and features an RFID blocking label.
  • A hand holds the Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760), a heavy-duty smart card protector for CAC, TWIC, PIV, HSPD-12 & secure ID badges featuring 13.56 MHz RFID shielding for added security.
  • A hand holds an employee ID badge for "Rafael Smith, Operations" in a Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760), a heavy duty protector for secure badges, featuring a photo, barcode, and the number 2 at the top.
  • Two Specialist ID Dual Sided RFID Blocking Badge Holders (SPID-1760) shown on a painted wooden surface provide 13.56 MHz RFID protection for CAC, TWIC, PIV, HSPD-12 & secure ID cards.
  • A hand holds a slim smartphone in a clear case, beside the Specialist ID Dual Sided RFID Blocking Badge Holder Horizontal (SPID-1760)—a heavy-duty 13.56 MHz shielded protector for CAC, TWIC, PIV, HSPD-12, and secure ID badges.
  • A hand holds the Specialist ID Dual Sided RFID Blocking Badge Holder (SPID-1760), labeled "Insert Card From Side," "FIPS-201 Approved," and "Made in Taiwan," featuring 13.56 MHz protection for secure CAC, TWIC, PIV, and HSPD-12 badges.
1 11

RFID Blocking Double Card Badge Holder Horizontal - Heavy Duty Smart Card Protector for CAC, TWIC, PIV, HSPD-12 & Secure ID Badges

RFID Blocking Double Card Badge Holder Horizontal - Heavy Duty Smart Card Protector for CAC, TWIC, PIV, HSPD-12 & Secure ID Badges

IN STOCK
 
$5.95 each
 
Total Price: $0.00
Get a Quote

Product Specifications
  • Part number:
  • Dual-sided capacity - holds two standard ID cards (e.g., photo ID + access badge) in one slim holder.
  • RFID shielding at 13.56 MHz - helps block common high-frequency skimming attempts.
  • Durable hard plastic - clear, impact-resistant housing - sits flat on lanyards or badge reels and fits easily into pockets.
  • Low-profile design - trusted by law enforcement, military, TSA, Homeland Security, and large corporations for secure ID protection.
View full details

Description

Protect sensitive credentials and reduce skim risk. The Specialist ID Dual-Sided RFID Blocking Badge Holder shields two standard ID cards from 13.56 MHz RFID scanning in a slim, rugged form that pairs with lanyards, badge reels, or clips.

Why you'll love it

Dual-sided capacity - carry two IDs (e.g., photo ID + access badge) in one holder. RFID shielding at 13.56 MHz - helps block common high-frequency skim attempts. Cards must be removed or partially slid out for reader access. Durable hard plastic - clear, impact-resistant housing stands up to daily wear. Horizontal, low-profile design - slim enough for pockets; sits flat on lanyards and reels. Open face front & back windows - easy visual ID without removing cards (when allowed). Slot hole attachment - secure attachment to lanyards, badge reels, or clips.

Built for high-security workplaces

Ideal for government & defense, law enforcement, corrections, aviation & TSA, secure corporate campuses, and security contractors. 

 

This product remains built to the same engineering and shielding guidelines previously used when FIPS 201 approval applied.


Specifications

Dual-Sided Design Securely holds two standard CR80 ID cards (credit-card size), front and back
Orientation Horizontal
RFID Protection Blocks 13.56 MHz signals used in government and corporate smart cards
Material Durable hard plastic
Outer Measurements 3.5 inches (W) x 2 1/4 inches (H)
Attachment Center slot hole (lanyards, reels, clips)
Ideal Uses Perfect for dual-badge employees, contractors, government, and security personnel

Common Questions


Does this badge holder block RFID scanning or skimming?
Yes! It features RFID-blocking protection on both sides to guard against unauthorized 13.56 MHz RFID and NFC reads. It helps prevent data theft and identity skimming, keeping your information secure while inside the holder.
What size cards fit?
Standard CR80 ID cards (credit-card size). Perfect for work ID, CAC, TWIC, PIV
How do the cards fit?
Slide your ID / access card into one window, alternate card into the other. Secure tabs keep your cards in place. Cards can easily slide out for card reader access.

Backed by Specialist ID customer support. Questions? We’re here to help with selection and deployment for teams of any size. 

×