• A hand holds a Horizontal Economy Crystal Clear Card Dispenser (P/N 726-CT1) with a white CR80 card partially inserted, showing the green and yellow "Specialist ID" logo.
  • A person in a blue polo shirt holds up the Horizontal Economy Crystal Clear Card Dispenser (P/N 726-CT1), which displays an employee ID with photo, name, and title, and features a thumb notch for easy removal from its holder.
  • The Horizontal Economy Crystal Clear Card Dispenser (P/N 726-CT1) is a rigid hard plastic, side-load ID badge protector with a thumb notch for easy removal, supporting horizontal layout and visible barcodes/QR codes.
  • Four images show the Horizontal Economy Crystal Clear Card Dispenser (CR80 size, hard plastic) worn with a badge reel, lanyard, and chain. Features: crystal clear, slot & chain holes, side load with thumb notch. Text: "1 Card Badge Holder.
  • The Horizontal Economy Crystal Clear Card Dispenser (P/N 726-CT1) is a hard plastic, side load ID badge protector with a thumb notch for easy card removal, featuring slots for lanyard or clip attachment. Photographed on a white background.
  • An employee ID card labeled “Rafael Smith, Operations” is partially out of a Horizontal Economy Crystal Clear Card Dispenser (P/N 726-CT1) with a thumb notch, resting on a wooden surface.
  • A Horizontal Economy Crystal Clear Card Dispenser and a green Specialist ID card, along with a retractable badge reel and a photo ID labeled Rafael Smith, are shown on a wooden surface.
1 7

Horizontal Side-Load Hard Plastic Badge Holder with Thumb Notch (726-CT1)

Horizontal Side-Load Hard Plastic Badge Holder with Thumb Notch (726-CT1)

IN STOCK
 
$0.62 each
 
Total Price: $0.00
Customize It Get a Quote

Complex Project? Click Here

Product Specifications
  • Part number:
  • Rigid Clear Plastic Construction: Crystal clear hard plastic resists bending, cracking, and everyday handling wear while keeping ID cards fully visible from both sides.
  • Side-Load with Thumb Notch: Insert dimensions 3.38" x 2.13" (86 x 54mm), outer dimensions 3.54" x 2.76" (90 x 70mm). Cards insert and remove easily without tools.
  • Barcodes and RFID Scan Through: Barcodes are readable through the clear front panel. RFID proximity cards may read through depending on reader configuration.
  • Hospitals, Universities, and Corporate Programs: Preferred for horizontal-format ID programs where rigid protection is needed over flexible vinyl.
View full details

Customers like you also choose...

SPID-075 clear rigid open-face ID badge holder with thumb notch Hand holding SPID-075 clear rigid single-card badge holder

Open-Face Rigid Badge Holder

Open-Face Rigid Badge Holder

#SPID-075-CLEAR
$1.19
$1.19
Clear Horizontal Permanent Locking Plastic Card Holder (P/N 1840-6040) with a detachable clip, shown in two parts. Arrows indicate the direction to attach or detach the clip from the locking badge holder. A close-up of hands holding a Clear Horizontal Permanent Locking Plastic Card Holder (P/N 1840-6040) with a card inside, displaying a logo featuring two lions and the text "Specialist ID SIC INC.

Horiz Permanent Locking Holder

Horiz Permanent Locking Holder

#1840-6040
$1.05
$1.71 $1.05
A black plastic Identity Stronghold RFID Blocking Secure Badgeholder Classic - Holds 1 Card - Shields 13.56MHz Signal (IDSH1004-001B-002) with a clear front contains a test card featuring an RFID blocking chip and the word "Test Card" alongside an image of a historic figure. A person in a dress shirt holds an ID card near an access control reader mounted on a wall, likely to gain entry through a secured door using their Identity Stronghold RFID Blocking Secure Badgeholder Classic - Holds 1 Card - Shields 13.56MHz Signal (IDSH1004-001B-002).

Shielded RFID-Blocking 1-Card Holder

Shielded RFID-Blocking 1-Card Holder

#IDSH1004-001B-002-XXX
$7.38
$7.38
A Horizontal Open-Face Rigid Plastic Card Holder (1840-811X) with rounded corners and various cutouts for securing the ID. Sold by Specialist ID. A Horizontal Open-Face Rigid Plastic Card Holder (1840-811X) with a thumb slide opening on the side, featuring two slots and a hook for hanging. Sold by Specialist ID.

Horizontal Open-Face Holder

Horizontal Open-Face Holder

#1840-811X
$0.40
$0.72 $0.40
A Vinyl Horizontal Badge Holder with Flap (506-32FS) with two holes and a slot for attaching to a lanyard, offering durable badge protection while showing no visible identification inside. A company ID badge for account executive James Sanderson from Management Group, featuring a photo, barcode, and text. This ID badge comes with durable badge protection using a Vinyl Horizontal Badge Holder with Flap (506-32FS) to ensure longevity and security.

3x2 Horizontal Flap Holder

3x2 Horizontal Flap Holder

#506-32FS
$0.67
$1.28 $0.67

Description

The 726-CT1 is a horizontal rigid clear plastic badge holder with a side-load opening and thumb notch for easy card insertion and removal. Insert dimensions are 3.38" x 2.13" (86 x 54mm), fitting standard CR80 credit card and driver's license sized credentials. Outer dimensions are 3.54" x 2.76" (90 x 70mm). The crystal clear construction keeps ID cards fully visible from both sides while the rigid plastic shell resists bending, cracking, and everyday handling wear.

Barcodes are readable through the clear hard plastic front panel. RFID proximity cards may read through the holder depending on reader configuration and card type. Cards with magnetic stripes can be removed quickly via the thumb notch for swipe access, then reinserted without removing the holder from a lanyard or badge reel.

Slot and chain holes along the top accept standard lanyards, badge reels, neck chains, and strap clips without additional hardware. Single-variant product in crystal clear (SKU: 726-CT1). Sized for standard 30-mil CR80 credentials.

×