Description
The Self Adhesive UV Protecting Overlay adds professional-grade protection to any standard CR80 ID card in seconds. No laminator. No card printer module. Just peel the backing, align one edge to your badge, and smooth it across with a spare card to remove air bubbles.
Each overlay is a crystal clear 7 mil laminate that shields your printed ID from UV fading, fingerprints, scratches, and everyday handling. It's the same type of protective layer that expensive card printers with built-in lamination modules apply automatically — without the equipment investment.
Who Is This For?
- Organizations printing ID badges in-house without a lamination module
- Extending the life of existing badges that are showing wear or fading
- Protecting visitor badges, temporary credentials, or event passes
- Small offices that need a handful of overlays — not a full laminator
- IT departments replacing single damaged badges without reprinting
How to Apply
- Peel the clear overlay from the backing sheet
- Align one edge of the overlay flush with one edge of your ID card
- Slowly press down across the card, using a spare card as a squeegee
- Smooth from one side to the other to push out any air bubbles
Specifications
| Part Number | 0602-4950 / SPID-9001 / JAM UV-81P |
| Card Size | Standard CR80 (3.375" x 2.125") |
| Overlay Dimensions | 2-1/16" (W) x 3-5/16" (H) |
| Thickness | 7 mil (.007") |
| Material | Clear self-adhesive laminate |
| Finish | Crystal clear / glossy |
Frequently Asked Questions
Will this work with my ID card?
Yes. This overlay fits any standard CR80 credit card sized badge (3.375" x 2.125"), regardless of how it was printed — Fargo, Evolis, Magicard, Zebra, Entrust, or any other brand. It also works on pre-printed, inkjet, or handwritten badges.
How is this different from a lamination module?
A lamination module is a hardware add-on for card printers that applies overlays automatically during printing. This product gives you the same clear protective layer, applied by hand. It's ideal when you don't have a lamination module or need to protect cards that have already been printed.
Can I remove the overlay once applied?
The adhesive is designed for permanent application. Once applied and smoothed, it bonds to the card surface. We recommend aligning carefully before pressing down.