• Front view of the black TEST-123 rigid vertical ID badge holder, showing the clear polycarbonate front panel, the thumb slots on the face and side rails, and the molded loop at the top.
  • Black TEST-123 rigid vertical ID badge holder turned 45 degrees to the front, showing the depth of the hard shell, the ribbed side rail and the clear front panel.
  • 360-degree rotating view of the black TEST-123 rigid vertical ID badge holder, showing the clear front panel, the ribbed side rails, the molded top loop and the metal spring belt clip on the back.
  • Product film of the black TEST-123 rigid vertical ID badge holder: the holder lit against a dark background, close-up detail on the metal spring belt clip and the Specialist ID name molded into the side rail, and the holder standing on a white background. Includes background music.
  • Black TEST-123 rigid vertical ID badge holder turned 45 degrees to the back, showing the metal spring belt clip riveted to the rear panel.
  • Back view of the black TEST-123 rigid vertical ID badge holder, showing the metal spring belt clip down the center, the thumb cutouts and the Specialist ID name molded into the side rails.
1 6

Rigid Vertical ID Badge Holder with Metal Spring Belt Clip (TEST-123)

Rigid Vertical ID Badge Holder with Metal Spring Belt Clip (TEST-123)

IN STOCK
 
$1.45 each
 
Total Price: $0.00
Get a Quote

Complex Project? Click Here

Product Specifications
  • Part number:
  • Metal Spring Belt Clip: Steel clip riveted to the back panel holds the badge on a duty belt, waistband or pocket edge with no lanyard needed
  • Thumb Slots Front and Side: Push the card up to swipe or tap without taking it out of the holder or off your belt
  • Rigid Hard Shell with Clear Front: Frames the card on all four sides against bending and scratching while keeping the photo and barcode readable
  • Top Loop for Lanyards and Reels: Molded loop accepts a lanyard, badge reel or neck chain, so the same holder works worn either way
View full details

Description

The TEST-123 is a rigid vertical badge holder built for people who carry their credential on a belt rather than around their neck. A spring steel clip is riveted to the back panel, so the holder slides onto a duty belt, a waistband or a pocket edge and stays put through a shift.

The hard shell frames the card on all four sides and carries a clear polycarbonate front, so the photo and barcode stay readable while the credential is protected from bending and scratching. Thumb slots in the front face and along both side rails let you push the card up far enough to swipe or tap without pulling it out of the holder.

A molded loop at the top accepts a lanyard, badge reel or neck chain, so the same holder still works if a site changes how badges are worn. Insert size is standard credit card, carried in a vertical orientation.

×

Reviews